The quality of medical equipment harness processing materials will directly affect the quality of the harness to a certain extent. At the same time, the choice of wire harness material will affect the service life of the wire harness to a certain extent. Under normal circumstances, the wire harness is an insulating sheath, wires and dressings and other components.
The sheath material in the electronic wiring harness usually has PBT, PA66, ABS, PA6 and so on. In the process of designing the plug-in, different materials can be selected according to different requirements. According to the actual situation of adding reinforcing materials in the plastic, in order to achieve the purpose of enhancement.
The electronic wiring harness should be comprehensive and detailed during processing. In the use process, strict management is required to achieve excellent quality. Have a complete wire harness production process and strict quality assurance system.
The winding of the electronic wire harness can effectively play a flame retardant effect to a certain extent, and can prevent its interference during use, resist abrasion and reduce its noise, and can be used according to the specific environment and its use time. The size of the space to choose the appropriate packaging materials.
The terminals processed by the electronic wiring harness are mainly made of copper in the manufacturing process, and there are two types of bronze and brass. In this respect, the importance of brass does not stop there. In addition, different coatings need to be selected according to different requirements.
Electronic harness processing problems
In the wire harness manufacturing process, the first stop is an open process. In the production process, the accuracy of the opening process is directly related to the accuracy of the wiring harness and even the accuracy of the entire production. Once an error occurs, especially if the open circuit size is short, it will lead to rework of all stations.
After the wire harness is opened, the second stop is the crimping process. In the manufacturing process, the crimping parameters are effectively determined according to the terminal types required by the drawings, and a crimping operation manual is prepared. Special requirements for attention and training are required in the process documents.
The material of the wiring terminal in the wire harness processing and production needs to pay attention to the material of the terminal is mainly brass and bronze. The hardness of brass is slightly lower than that of bronze, while the proportion of brass is greater. In addition, different plating layers can be selected according to different requirements.
During the use of the wire harness, in order to improve assembly efficiency, a pre-assembly station must be provided for the complex wire harness. If the pre-assembly quantity is too small or the assembly line path is unreasonable, the total assembly quantity will be increased. The workload of the staff. The final step of wire harness processing is the assembly process. During the operation, according to the assembly board design of the product development part, the mold equipment and bin size will be effectively designed, and the quantity of all assembly jackets and accessories will be posted. Improve assembly efficiency on the material box.